Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 1

Étape 1
Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is attached by a single SATA power/data cable—do not attempt to fully remove it from the iMac yet. The hard drive is attached by a single SATA power/data cable—do not attempt to fully remove it from the iMac yet.
  • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

  • The hard drive is attached by a single SATA power/data cable—do not attempt to fully remove it from the iMac yet.

ロジックボードに一番近い端からハードドライブを持ち上げて、角からわずかに引き出します。

ハードドライブは1本のSATAパワー/データケーブルによって繋がれています。この段階ではまだiMacから完全に外さないでください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.