Aller au contenu principal
Anglais
Français

Traduction de l’étape 6

Étape 6
Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case. One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
  • Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.

  • One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.

  • Lift the AirPort board/cable retainer assembly out of the upper case.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.