Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 15 tutoriels qui comprennent cette étape.
Traduction de l’étape 1
Étape 1
-
Disconnect the multicolor connector from the upper right corner of the logic board.
-
Remove the following 2 screws:
-
One Phillips buried under the cable to the right of the fan area.
-
One Phillips holding down the display data cable on the left side of the computer.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.