Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 5

Étape 5
Remove the battery from the iPhone.
Removing the battery
  • Remove the battery from the iPhone.

  • If your replacement battery came in a plastic sleeve, remove the sleeve before installation by pulling it away from the the ribbon cable.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a hard reset after reassembly. This can prevent several issues and simplify troubleshooting.

从手机中取出电池。

如果你更换的电池装在塑料膜中,在安装前把塑料套从排线处拉下来。

如果你的电池上并没有提前贴好胶条,请参考这个说明来更换电池胶条。

在组装好手机之后来一次强制重启。这可以很简单地避免诸多可能的问题。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.