Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Français

Traduction de l’étape 1

Étape 1
Insert the flat end of a spudger between the thin rubber strip surrounding the front display bezel and the rear display bezel. Do not try to insert the spudger between the thin rubber strip and the plastic face of the front display bezel. Use the flat end of your spudger to carefully pry the front display bezel away from the adhesive securing it to the rear display bezel.
  • Insert the flat end of a spudger between the thin rubber strip surrounding the front display bezel and the rear display bezel.

  • Do not try to insert the spudger between the thin rubber strip and the plastic face of the front display bezel.

  • Use the flat end of your spudger to carefully pry the front display bezel away from the adhesive securing it to the rear display bezel.

  • Do not pry against the fragile glass LCD panel. Also, do not excessively bend the plastic as it may permanently deform.

  • Continue prying until the front display bezel is free along the right side of the display and behind the right clutch hinge.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.