Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 2 tutoriels qui comprennent cette étape.
Traduction de l’étape 1
Étape 1
Disconnect All Relays
-
Using the plastic remover tool carefully unseat the four rectangular electric leads from the board. Each rectangle is a different size, the first one is large, the second one is medium, and the last two are small.
-
Using the plastic remover tool carefully unseat the square electric lead (marked in orange) from the board.
-
Using the plastic remover tool carefully unseat the small square and the two rectangular electric leads (marked in yellow) from the board.
| [title] Disconnect All Relays | |
| - | [* black] Using a plastic remover tool, carefully unseat each of the electric leads plugged into the board. |
| + | [* red] Using the plastic remover tool carefully unseat the four rectangular electric leads from the board. Each rectangle is a different size, the first one is large, the second one is medium, and the last two are small. |
| + | [* orange] Using the plastic remover tool carefully unseat the square electric lead (marked in orange) from the board. |
| + | [* yellow] Using the plastic remover tool carefully unseat the small square and the two rectangular electric leads (marked in yellow) from the board. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.