Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Français

Traduction de l’étape 2

Étape 2
To disconnect the heat sink thermal sensor, pinch its cables between your thumb and a spudger and pry the spudger upward to lift the connector up and out of its socket on the logic board.
  • To disconnect the heat sink thermal sensor, pinch its cables between your thumb and a spudger and pry the spudger upward to lift the connector up and out of its socket on the logic board.

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.