Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Anglais
Français

Traduction de l’étape 3

Étape 3
Carefully disconnect the three wire bundles  attached to the bad power supply board. They are in yellow boxes in the picture Remove the four screws (red circles in the picture) in the corners of the bad power supply board and lift it up to remove it The black cylindrical component in the green square on the board is a capacitor. If it is puffy or leaking liquid or goo, then the power supply board is definitely bad!
Disconnect & Remove the Bad Power Supply Board
  • Carefully disconnect the three wire bundles attached to the bad power supply board. They are in yellow boxes in the picture

  • Remove the four screws (red circles in the picture) in the corners of the bad power supply board and lift it up to remove it

  • The black cylindrical component in the green square on the board is a capacitor. If it is puffy or leaking liquid or goo, then the power supply board is definitely bad!

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.