Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 8 tutoriels qui comprennent cette étape.

Retourner au tutoriel
Anglais
Français
Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2
Insert a thumbnail, or a prying tool like a spudger, into the notch at the bottom left of the back cover you used earlier to remove the back cover. Pry up the plastic panel, including the loudspeaker, until you can get a good grip.

  • Insert a thumbnail, or a prying tool like a spudger, into the notch at the bottom left of the back cover you used earlier to remove the back cover.

  • Pry up the plastic panel, including the loudspeaker, until you can get a good grip.

Localisez le creux utilisé lors des étapes précédentes.

Soulevez doucement en utilisant vos doigts.

[* yellow] Locateblack] Insert a thumbnail, or a prying tool like a spudger, into the same gap used innotch at the bottom left of the back cover you used earlier stepto remove the back cover.
[* black] Lift gently using your fingersPry up the plastic panel, including the loudspeaker, until you can get a good grip.
[* yellow] Locateblack] Insert a thumbnail, or a prying tool like a spudger, into the same gap used innotch at the bottom left of the back cover you used earlier stepto remove the back cover.
[* black] Lift gently using your fingersPry up the plastic panel, including the loudspeaker, until you can get a good grip.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.