Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Allemand

Traduction de l’étape 2

Étape 2
Insert the edge of a spudger in between the trigger and the trigger assembly near the left edge. Pry the housing away from the catch on the trigger. Using the previously described technique, pry the housing on the right edge away from the trigger. Rotate the trigger away from the logic board, past its housing.
  • Insert the edge of a spudger in between the trigger and the trigger assembly near the left edge. Pry the housing away from the catch on the trigger.

  • Using the previously described technique, pry the housing on the right edge away from the trigger.

  • Rotate the trigger away from the logic board, past its housing.

Setze die Kante eines Spudgers zwischen den Trigger und die Triggereinheit nahe an der linken Kante ein. Heble die Fassung von ihrer Aufhängung auf dem Trigger weg.

Heble in gleicher Weise die Fassung an der rechten Kante vom Trigger weg.

Drehe den Trigger vom Logic Board weg und an seiner Fassung vorbei.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.