Aller au contenu principal
Anglais
Français

Traduction de l’étape 18

Étape 18
With the DMD board exposed, proceed to remove the four screws that hold the heatsink bracket to the board. DO NOT touch the screws highlighted in red.
  • With the DMD board exposed, proceed to remove the four screws that hold the heatsink bracket to the board.

  • DO NOT touch the screws highlighted in red.

  • These three screws highlighted in red are for adjustment of the DLP chip/DMD board. If you touch them you will throw off the factory adjustment of your chip.

  • With the four screws highlighted in green removed you can remove the heatsink bracket.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.