Aller au contenu principal

iPad Mini 3 Wi-Fi LCDシールドプレート交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 48 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 20

Étape 20
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • Slide the lower left pick to the lower left corner to cut the adhesive on that corner.

  • Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad.

  • There are quite a few things to avoid beneath the lower bezel, so study the third image closely:

  • Antennas

  • Home button cavity

  • Digitizer cable

  • The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed.

本体左側の下に挟んであるピックをスライドさせ左側下のコーナーに付けられた接着材を分離します。

ピックを角に挟んだままにします。これ以上こじ開けず、iPadにピックを挟んだままにします。

このベゼル下の間には避けるべきパーツが多く搭載されています。3番目の画像をよく確認してください:

アンテナ

ホームボタン

デジタイザーケーブル

以下の手順では、これらのパーツを損傷しないよう、どこをこじ開ければ良いかを示してます。指定された場所をこじ開けてください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.