Aller au contenu principal

iPad Mini 3 Wi-Fi 液晶显示板更换

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 48 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 22

Étape 22
iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 1 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 2 de 3 iPad Mini 3 Wi-Fi LCD Shield Plate Replacement: étape 0, image 3 de 3
  • Insert the tip of one last pick next to the previous step's pick, and slide it beneath the home button.

  • Stop about an inch from the right-hand side to avoid cutting the digitizer cable.

  • Insert the pick slightly deeper and work it back toward the home button.

  • Again, be sure to only slide the pick toward the center of the iPad when it is fully inserted; otherwise you may damage the antenna beneath the glass.

拿一片新的撬片来从刚才那片撬片右边Home键下方继续滑动。

在距离右侧边缘约一英寸的位置前停下,以避免切割到排线。

将撬片深入,再往回滑动至Home键处。

再次,请确保只有当撬片完全插入iPad时,才能向iPad的中心滑动; 否则可能会损坏玻璃面板下方的天线。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.