Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Français

Traduction de l’étape 1

Étape 1
Grab the optical drive cable by its connector and pull it away from the body of the hard drive. Pulling on anything but the connector may damage the optical drive cable. Remove the two black Phillips #0 screws securing the small metal mounting bracket. Transfer this bracket to your new optical drive or hard drive enclosure.
  • Grab the optical drive cable by its connector and pull it away from the body of the hard drive.

  • Pulling on anything but the connector may damage the optical drive cable.

  • Remove the two black Phillips #0 screws securing the small metal mounting bracket. Transfer this bracket to your new optical drive or hard drive enclosure.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.