Aller au contenu principal
Anglais
Français

Traduction de l’étape 8

Étape 8
Since the calibration will be erased if the printer errors out, wait until the printhead is bone dry before installing it. Printhead initialization uses 1/2 of your ink (non-XL). While the printhead will not be seen as "new", a unavoidable Printhead Preparation process must run. Once the printhead is satisfactorily dry, reinstall the printhed and ink in the reverse order they were removed. Plug the printer in when installed.
Reinstall the printhead and ink
  • Since the calibration will be erased if the printer errors out, wait until the printhead is bone dry before installing it. Printhead initialization uses 1/2 of your ink (non-XL).

  • While the printhead will not be seen as "new", a unavoidable Printhead Preparation process must run.

  • Once the printhead is satisfactorily dry, reinstall the printhed and ink in the reverse order they were removed. Plug the printer in when installed.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.