Aller au contenu principal
Anglais
Français

Traduction de l’étape 5

Étape 5
If the printer is plugged in while the printhead is removed, the calibration data may be erased. Verify the printer is unplugged BEFORE removing the printhead. With the printer is unplugged, remove the printhead. Lift the locking latch up and the printhead will be loose. With the printhead unlocked, remove it. Lift the printhead up as shown. Leave the scanner lid open as an indication the printhead was removed.
Preserve your printhead calibration
  • If the printer is plugged in while the printhead is removed, the calibration data may be erased. Verify the printer is unplugged BEFORE removing the printhead.

  • With the printer is unplugged, remove the printhead. Lift the locking latch up and the printhead will be loose.

  • With the printhead unlocked, remove it. Lift the printhead up as shown. Leave the scanner lid open as an indication the printhead was removed.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.