Aller au contenu principal

Remplacement de l'ensemble boutons de l'iPad Mini 3 Wi-Fi

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Français

Traduction de l’étape 6

Étape 6
iPad Mini 3 Wi-Fi Case Button Assembly Replacement: étape 0, image 1 de 2 iPad Mini 3 Wi-Fi Case Button Assembly Replacement: étape 0, image 2 de 2
  • Peel the power button bracket off of the rear case with a set of tweezers and move it out of the way.

  • Do not attempt to remove the power button cable bracket or cable from the iPad, as it is still attached to the rest of the button cable assembly.

  • At this point you can push the power button cover into the case and remove it from the iPad.

Décollez le support du bouton de marche de la coque arrière avec une pincette et poussez-le de côté.

N'essayez pas d'enlever le support ou la nappe du bouton de marche de l'iPad, car ils sont toujours fixés au reste du bloc des boutons.

À ce stade, vous pouvez pousser le cache du bouton de marche à l'intérieur de la coque et le retirer de l'iPad.

-[* black] Peel the power button bracket off of the rear case with a set of tweezers and move it out of the way.
+[* black] Peel the power button bracket off of the rear case with a set of [product|IF145-020|tweezers] and move it out of the way.
[* icon_caution] Do not attempt to remove the power button cable bracket or cable from the iPad, as it is still attached to the rest of the button cable assembly.
[* icon_note] At this point you can push the power button cover into the case and remove it from the iPad.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.