Aller au contenu principal
Anglais
Espagnol

Traduction de l’étape 1

Étape 1
Apply heat to weaken adhesive. If using a heat gun, use a higher temperature such as 150℃ for a minute because the waterproof adhesive sticker is strong. Place the suction cup and pull to create a gap. Insert a guitar pick to cut the sticker and remove the back cover. Place the suction cup and pull to create a gap. Insert a guitar pick to cut the sticker and remove the back cover.
Remove back cover
  • Apply heat to weaken adhesive. If using a heat gun, use a higher temperature such as 150℃ for a minute because the waterproof adhesive sticker is strong.

  • Place the suction cup and pull to create a gap. Insert a guitar pick to cut the sticker and remove the back cover.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.