Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 1

Étape 1
The iPod Touch 4th Generation front panel is attached to the rear case by adhesive. The use of a heat gun to soften the adhesive is highly recommended.
  • The iPod Touch 4th Generation front panel is attached to the rear case by adhesive. The use of a heat gun to soften the adhesive is highly recommended.

  • With the heat gun set on "low", begin heating the lower portion of the Touch near the home button.

  • It is suggested to heat the desired portion in a circular motion pattern to evenly dissipate the amount of heat throughout the device.

iPod Touch第4代前面板通过粘合剂连接在后壳上。 强烈建议使用热风枪软化粘合剂。

当热风枪温度调节在“低”位置时,开始加热触摸屏下部靠近主home键的位置。

建议以绕圈圈的方法加热所需的部分,以均匀地散发整个装置的热量。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.