Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Français

Traduction de l’étape 1

Étape 1
Using the spudger, create space between the speaker covers and then remove. On the underside of the device, remove the rubber stand with the BeatsPill logo on it. Using a Philips #0 Screwdriver that is ESD-safe. Remove the four screws that were underneath the rubber stand.
Removing the Case Screws
  • Using the spudger, create space between the speaker covers and then remove.

  • On the underside of the device, remove the rubber stand with the BeatsPill logo on it.

  • Using a Philips #0 Screwdriver that is ESD-safe. Remove the four screws that were underneath the rubber stand.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.