Canon Powershot A720 IS Motherboard Replacement

Anglais

Français

Traduction de l’étape 10

Étape 10

Use the plastic opening tool to separate the user button circuit board from the shutter button and settings dial housing unit.
Carefully disconnect the ribbon cable that is attached to the user buttons circuit board from the ZIF connector that is attached to the motherboard with your thumb and index finger. Get as close to the ZIF connector as possible without touching the motherboard.
Be careful not to the rip the ribbon cable out of the ZIF connector when removing.
Remove the user button circuit board.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.