Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 5 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 3

Étape 3
Remove the two silver 17.45mm Phillips screws from the cartridge tray using a Phillips head #2 screwdriver. Remove the two bronze 13.25mm Phillips screws from the cartridge tray using a Phillips head #2 screwdriver. Slide the cartridge tray toward you, away from the 72-PIN connector, and off the motherboard assembly.
  • Remove the two silver 17.45mm Phillips screws from the cartridge tray using a Phillips head #2 screwdriver.

  • Remove the two bronze 13.25mm Phillips screws from the cartridge tray using a Phillips head #2 screwdriver.

  • Slide the cartridge tray toward you, away from the 72-PIN connector, and off the motherboard assembly.

Quita los dos tornillos plateados Phillips de 17.45 mm de la bandeja de los cartuchos usando un destornillador Phillips de cabeza #2.

Quita los dos tornillos de bronce Phillips de 13.25 mm de la bandeja de los cartuchos usando un destornillador Phillips de cabeza #2.

Desliza la bandeja de cartuchos hacia ti, hacia afuera del conector de 72 pines, y fuera del conjuntos de la placa base.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.