Canon Powershot SD750 Motherboard Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais

Français

Traduction de l’étape 9

Étape 9

Leave the camera facing backward so that the lens is facing up.
Pull the motherboard out by lifting it up on the left side about a 1/2 inch from the case and then slide it to the left.
Note: When reassembling, make sure the ZIF connectors are not covered by motherboard.
Caution: When removing the motherboard, pay special attention to the battery door detection switch or you may break the plastic nib.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.