Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Anglais
Chinois

Traduction de l’étape 4

Étape 4
Lay the backed adhesive tape down on the Force Touch sensor, around the edge of the case where the screen rests. Start in a corner with the tape as close to the corner wall as possible. Press on the brown backing paper with a plastic opening tool to secure the adhesive around the entire perimeter.
  • Lay the backed adhesive tape down on the Force Touch sensor, around the edge of the case where the screen rests.

  • Start in a corner with the tape as close to the corner wall as possible.

  • Press on the brown backing paper with a plastic opening tool to secure the adhesive around the entire perimeter.

将胶带背面放在Force Touch 传感器上,围绕在设备外壳的边缘处。

角对角的粘贴。

使用塑料撬棒来轻轻按压来确保整个胶带已经粘合在设备上面。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.