Aller au contenu principal
Anglais
Espagnol

Traduction de l’étape 1

Étape 1
Use a spudger or the tip of your finger to carefully disconnect the orange click wheel ribbon from the logic board.
  • Use a spudger or the tip of your finger to carefully disconnect the orange click wheel ribbon from the logic board.

  • Careful not to dig the spudger in too deep to avoid detaching the contact on the logic board. Try to keep the spudger as close to the orange click wheel ribbon connector as possible.

Usa un spudger o la punta de tu dedo cuidadosamente para separar el cable plano naranja de la rueda de clic de la placa lógica.

Procura no insertar demasiado el spudger para evitar arrancar el conector de la placa lógica. Trata de mantener el spudger lo más cerca que puedas del cable naranja de la rueda de clic.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.