Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
Insert the flat end of a spudger between the display inverter and the front display bezel near the center of the inverter. Run the spudger along the length of the display inverter, separating it from the adhesive securing it to the front display bezel.
  • Insert the flat end of a spudger between the display inverter and the front display bezel near the center of the inverter.

  • Run the spudger along the length of the display inverter, separating it from the adhesive securing it to the front display bezel.

  • Lift the inverter out of the front display bezel.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.