Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 18 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 6

Étape 6
Slide the pick along the edge of the display, towards the headphone jack. If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat. Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.
  • Slide the pick along the edge of the display, towards the headphone jack.

  • If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat.

  • Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.

  • A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad.

将撬片在显示屏边缘处一直滑动到耳机孔处。

如果在滑动的时候遇到了很大的阻力,请重新加热iOpener,来进一步融化粘合剂。

小心,切勿使撬片在LCD显示屏与前面板之间滑动,这样将会永久损坏显示屏。

一个好的经验法则是永远不要将撬片插入 iPad 中超过四分之一英寸(6 毫米)。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.