Aller au contenu principal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 12 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 15

Étape 15
Use the flat end of a spudger to disconnect the USB-C port cable bracket by prying it straight up from the logic board. To reconnect this cable, first line up the metal bracket over the screw holes, then press down on the middle of the bracket. Make sure it's aligned correctly, or you may damage the connector.
  • Use the flat end of a spudger to disconnect the USB-C port cable bracket by prying it straight up from the logic board.

  • To reconnect this cable, first line up the metal bracket over the screw holes, then press down on the middle of the bracket. Make sure it's aligned correctly, or you may damage the connector.

Usa la parte piatta di uno spudger per scollegare la copertura del cavo della porta USB-C tirandola verso l'alto dalla scheda madre.

Per ricollegare il cavo, prima allinea la copertura in metallo con i fori delle viti, quindi premila sul centro. Assicurati che sia allineata correttamente, o potresti danneggiare il connettore.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.