Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 10

Étape 10
Continue working the tip of the spudger around the edge of the gasket until the gasket is fully separated from the front panel. Continue working the tip of the spudger around the edge of the gasket until the gasket is fully separated from the front panel. Continue working the tip of the spudger around the edge of the gasket until the gasket is fully separated from the front panel.
  • Continue working the tip of the spudger around the edge of the gasket until the gasket is fully separated from the front panel.

Continua a far scorrere la punta dello spudger attorno ai bordi della guarnizione fino a separarla completamente dal pannello anteriore.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.