Aller au contenu principal

Info : Vous modifiez actuellement une condition préalable du tutoriel que vous venez de consulter. Toutes les modifications affecteront les 17 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 3

Étape 3
Remove the cover from the Game Pak slot before continuing. Insert the edge of a spudger in between the lower and upper case near the top right corner of the DS Lite. Carefully run the spudger along the right edge of the DS Lite, creating an opening in the process.
  • Remove the cover from the Game Pak slot before continuing.

  • Insert the edge of a spudger in between the lower and upper case near the top right corner of the DS Lite.

  • Carefully run the spudger along the right edge of the DS Lite, creating an opening in the process.

  • Continue running the spudger along the backside of the DS Lite until the majority of the lower case has been separated from the upper case.

Inserisci il bordo di uno spudger tra il case inferiore e quello superiore vicino all'angolo superiore destro del DS Lite.

Fai scorrere con attenzione lo spudger lungo il bordo destro del DS Lite, creando nel frattempo un'apertura.

Continua a far scorrere lo spudger lungo il retro del DS Lite finché la maggior parte del case inferiore è stato separato da quello superiore.

+[* icon_note] Remove the cover from the Game Pak slot before continuing.
[* black] Insert the edge of a spudger in between the lower and upper case near the top right corner of the DS Lite.
[* black] Carefully run the spudger along the right edge of the DS Lite, creating an opening in the process.
[* black] Continue running the spudger along the backside of the DS Lite until the majority of the lower case has been separated from the upper case.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.