Traduire l'étape #1 - Canon Powershot SD790 IS LCD Screen Replacement - iFixit

Réparez vos affaires

Droit à la réparation

Boutique

Retourner au tutoriel

Anglais

Français

Étape suivante

Traduction de l’étape 1

Étape 1

Tools Required: #00 Phillips-head screwdriver

Caution: The six screws removed in this step are tiny and should be placed in a secure location.

Using the #00 Phillips-head screwdriver, remove the two screws from the left side (as shown in picture 1).

Tools Required: #00 Phillips-head screwdriver
Caution: The six screws removed in this step are tiny and should be placed in a secure location.
Using the #00 Phillips-head screwdriver, remove the two screws from the left side (as shown in picture 1).
Using the #00 Phillips-head screwdriver, remove the two screws from the right side of the camera (as shown in picture 2).
Using the #00 Phillips-head screwdriver, remove the two screws from the bottom of the camera (as shown in picture 3).

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.