Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 1

Étape 1
Remove the following ten screws:
  • Remove the following ten screws:

  • Three 14.4 mm Phillips #00 screws

  • Three 3.5 mm Phillips #00 screws

  • Four 3.5 mm shouldered Phillips #00 screws

  • When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

Extrae los siguientes diez tornillos:

Tres tornillos Phillips #00 de 14,4 mm

Tres tornillos Phillips #00 de 3,5 mm

Cuatro tornillos de resalto Phillips #00 de 3,5 mm

[* black] Remove the following ten screws:
[* red] Three 14.4 mm Phillips #00 screws
[* orange] Three 3.5 mm Phillips #00 screws
[* yellow] Four 3.5 mm shouldered Phillips #00 screws
[* icon_note] When replacing the small screws, align them perpendicular to the slight curvature of the case (they don't go straight down).

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.