Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 38 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2
-
Remove the following 3 screws from the rear wall of the battery compartment:
-
One 3 mm Phillips #0. (Head: 2.75 mm. dia.)
-
Two 4 mm Phillips #0 on the either side. (Head: 2.75mm dia.)
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.