Traduire l'étape #1 - Canon Powershot SD550 LCD Screen Replacement - iFixit

Annuler

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Retourner au tutoriel

Anglais

Français

Étape suivante

Traduction de l’étape 1

Étape 1

Next, peel the navigation buttons from the button panel and set them aside.

To free the LCD display, remove the .113 inch screw in the top left corner.

Then, rotate the screen clockwise until it lifts away from the camera.

Next, peel the navigation buttons from the button panel and set them aside.
To free the LCD display, remove the .113 inch screw in the top left corner.
Then, rotate the screen clockwise until it lifts away from the camera.
There are two ribbon cables attached to the rear of the screen. Do not try to pull the screen off at this point.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.