Aller au contenu principal
Anglais
Français

Traduction de l’étape 2

Étape 2
Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable. On Santa Rosa/Penryn models, there is only one temperature sensor connector containing all four leads.  See second picture.
  • Disconnect the two newly-revealed temperature sensor connectors and the fan connector from the logic board. These connectors move up, not towards the rear of the case, and can be lifted with gentle pressure from under the cable.

  • On Santa Rosa/Penryn models, there is only one temperature sensor connector containing all four leads. See second picture.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.