Aller au contenu principal

iPad 2 Wi-Fi EMC 2415のロジックボードの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 3 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 1

Étape 1
iPad 2 Wi-Fi EMC 2415 Logic Board Replacement: étape 0, image 1 de 3 iPad 2 Wi-Fi EMC 2415 Logic Board Replacement: étape 0, image 2 de 3 iPad 2 Wi-Fi EMC 2415 Logic Board Replacement: étape 0, image 3 de 3
  • Use a plastic opening tool to lift the display data cable lock upwards.

  • Pull the display data cable out of its socket.

  • Be careful not pull the connector upward as you disconnect it from its socket.

プラスチック製開口ツールを使って、ディスプレイデータケーブルのロックを持ち上げます。

ソケットからディスプレイデータケーブルを引き抜きます。

ソケットからケーブルの接続を外すとき、コネクタを引き上げないようご注意ください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.