Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.
Traduction de l’étape 4
Étape 4


-
Loosen the ribbon cables from the board.
-
1-Directly below the viewfinder.
-
2-At the Base of the board.
-
3-At the top right near the selector wheel. 1 on top of the board 2 on the underside.
-
1-The center of the board, above the central hole.
-
With metal tweezers, remove the two white plastic clips from their sockets one on the base of the board and the other on the surface.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.