Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 4

Étape 4
Gently separate the seven ribbon cables from the motherboard. For more information on disconnecting ribbon cables, look here. There is one directly below the viewfinder (Image 1, blue). Two are on the base of the camera (Image 2, blue).
  • Gently separate the seven ribbon cables from the motherboard. For more information on disconnecting ribbon cables, look here.

  • There is one directly below the viewfinder (Image 1, blue).

  • Two are on the base of the camera (Image 2, blue).

  • There are three at the top right of the motherboard, near the selector wheel. One is on the top of the board, and two are on the underside (Image 1, green).

  • The final one is in the center of the board, near the central hole (Image 1, yellow).

  • Remove the two white plastic clips from their sockets with metal tweezers. One is on the base of the board (Image 2, red) and the other is on the surface (Image 1, red).

  • The bullets apply to all three picture included with this step.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.