Aller au contenu principal

Info : Vous modifiez un tutoriel pré-requis. Toutes les modifications apportées affecteront les tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 5

Étape 5
Make sure the battery is disconnected before you disconnect or reconnect the cable in this step. Disconnect the display cable by prying it straight up from its socket on the logic board.
  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Disconnect the display cable by prying it straight up from its socket on the logic board.

使用撬棒的平头或指甲断开显示排线接口, 与主板分离。

[* black] Use the flat end of a spudger, or a fingernail, toicon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Disconnect
the display data cable by prying it straight up from its socket on the logic board.
[* black] Use the flat end of a spudger, or a fingernail, toicon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Disconnect
the display data cable by prying it straight up from its socket on the logic board.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.