Canon PowerShot G1 X Mark II Motherboard Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais

Chinois

Traduction de l’étape 12

Étape 12

Use the flat end of the plastic spudger to rotate the black plastic locking tab towards the ribbon cable.
Insert the pointed end of the plastic spudger into a small hole on the side of the ribbon cable and pull the ribbon cable out of its housing.
Use the flat end of the plastic spudger to pry the ribbon cable connector from the motherboard.
Both ribbon cables should be removed after this step.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.