Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 8
Étape 8
-
Remove the following five secrews/standoffs from the DC-to-DC board:
-
One 3 mm Phillips in the lower right corner.
-
Two 3.5 mm Phillips on either side of the battery contacts.
-
One 10 mm Phillips in the upper right corner.
-
One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.