Acer Chromebook CB3-111-C670 WLAN Chip Replacement

Anglais

Espagnol

Traduction de l’étape 1

Étape 1

Turn off your Chromebook and disconnect any charging cables.
Turn the Chromebook over so that the back panel with the Chromebook's serial number is facing upward.
Use the Phillips #000 screwdriver to remove the twelve screws from the back panel.
Use an opening tool to detach the back panel. Start at one of the four corners of the Chromebook and gently work around the edges. Insert it in the crease where the back panel and the main board meet. You should hear a slight click; this is the sound of the back panel detaching from the board.
Be careful not to apply too much force or you could damage the ribbon cable that connects the back panel to the motherboard.
Once you have detached the back panel, do not lift it vertically from the Chromebook. With the Chromebook facing in the direction as shown in the picture above, take the right hand side of the back panel and lift it toward the left, as if you are opening a book.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.