Aller au contenu principal
Japonais
Anglais

MacBook Core 2 Duo Replacing the top board

Informations sur le tutoriel

= Terminé = Incomplet

      Décrivez la pièce ou le composant spécifique de ce device sur lequel vous êtes en train de travailler. Par ex : batterie

      Créer un titre.

      Ce bref résumé n'apparaîtra que dans les résultats de recherche.

      Communiquez des informations de base avant que le lecteur ne se plonge dans le tutoriel.

      Étapes du tutoriel

      Étape 1

      Please remove the following three screws:

      Étape 2

      Take out the battery and the 3 screws inside the battery compartment.

      Étape 3

      Please remove the following two screws at both ends of the partition on the right side of the battery. (The screw closer to the battery connector is only fixing the battery connector, so it is not necessary to remove it.)

      Étape 4

      Please remove the four screws indicated by the red circle of the image on the partition of the battery on the front side of the main unit. It is the 2nd, 4th, 7th, 9th screw from the left.

      Étape 5

      Please remove the following four screws on the back side of the computer:

      Étape 6

      Please remove the two screws on the optical drive side of the computer.

      Étape 7

      Since the keyboard and the track pad of the top board are connected with the logic board with the ribbon cable, please never forcibly pull out. The ribbon cable may be torn down.

      Étape 8

      While lifting the top board, please pull the black tab on the connector part of the silver cable upwards and remove the connector.

      Vos contributions sont faites dans le cadre de la licence open source Creative Commons.