Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
The rubber side bumpers should be installed as pictured: The side of the drive that's being propped by the hard drive holding bracket should have the rubber side bumper that has a sidewall on the corner, as indicated by the red box. There should be a space in between the two smaller rubber side bumpers, as indicated by the yellow box.
  • The rubber side bumpers should be installed as pictured:

  • The side of the drive that's being propped by the hard drive holding bracket should have the rubber side bumper that has a sidewall on the corner, as indicated by the red box.

  • There should be a space in between the two smaller rubber side bumpers, as indicated by the yellow box.

  • Both sides of the drive should be seated snugly, as shown in the third picture.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.