Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 3
Étape 3
-
Remove the two screws (3mm long) using a PH0 screwdriver that are holding the hard drive into the mounting bracket.
-
Pull up on the black Mylar sheet and remove it from the existing hard drive, it has some adhesive, but will simply pull off with just a small amount of force.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.