Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Anglais
Français

Traduction de l’étape 6

Étape 6
Unhook connector for small ribbon cable which connects control board on top of cube with circuit board on bottom of cube. Flip cube over (carefully supporting the inside mechanism--its not attached to the case anymore) and then lift case off. Don't go yanking it away brusquely, that control cable may have gotten pinned underneath even though you disconnected it.
Remove top of case
  • Unhook connector for small ribbon cable which connects control board on top of cube with circuit board on bottom of cube.

  • Flip cube over (carefully supporting the inside mechanism--its not attached to the case anymore) and then lift case off. Don't go yanking it away brusquely, that control cable may have gotten pinned underneath even though you disconnected it.

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.