Aller au contenu principal
Anglais
Français

Traduction de l’étape 25

Étape 25
Solder the two speaker leads to the circuit board. Even though the leads aren't excessively long, you'll need to trim them after soldering. Even though the leads aren't excessively long, you'll need to trim them after soldering.
  • Solder the two speaker leads to the circuit board.

  • Even though the leads aren't excessively long, you'll need to trim them after soldering.

Soudez les deux pattes du haut-parleur à la carte mère.

Même si les pattes ne sont pas excessivement longues, il faudra quand même les raccourcir après les avoir soudées.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.