Aller au contenu principal
Anglais
Français

Traduction de l’étape 5

Étape 5
Hold the wires closely together in the order shown in the previous step and push them into the new RJ-45 connector, with the clip end of the connector facing down, and the orange/white wire to the left. Push the wires to the end of the connector ensuring that all wires enter their respective chambers in the connector.
Insert the new RJ-45 connector
  • Hold the wires closely together in the order shown in the previous step and push them into the new RJ-45 connector, with the clip end of the connector facing down, and the orange/white wire to the left.

  • Push the wires to the end of the connector ensuring that all wires enter their respective chambers in the connector.

  • If you inspect the top of the connector you should be able to see the tips of the wires pushed against the end of the connector, as shown in the second photo in this step.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.