HTC Vive Teardown

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 13

Étape 13

HTC Vive Teardown: étape 0, image 1 de 3

HTC Vive Teardown: étape 0, image 2 de 3

HTC Vive Teardown: étape 0, image 3 de 3

Next out: the midframe that housed the motherboard. Clinging to its side we find a small ribbon cable that plays host to the headset button.
There are many Texas Instruments TLV70233 300 mA / 3.3 V LDO Regulators on the flex cable around the midframe.
A closer look at the midframe reveals a slot for the little black nub on the back of the left display panel.
This slot allows the nub to peek through and slide along that white Teflon strip, activating a linear potentiometer, used to track IPD position as you adjust the displays.
Ready to go deeper, we remove the twin lens-and-display assemblies from their housing and peel off the rubber light-gasket from around the lenses.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.