Aller au contenu principal

iPhone 6 Vervanging van de voorste paneelmodule

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 23 tutoriels qui comprennent cette étape.

Anglais
Néerlandais

Traduction de l’étape 6

Étape 6
iPhone 6 Front Panel Assembly Replacement, Removing the battery connector bracket screws: étape 0, image 1 de 1
Removing the battery connector bracket screws
  • Remove the following Phillips screws from the battery connector bracket:

  • One 2.2 mm screw

  • One 3.2 mm screw

  • During your repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your phone.

Verwijder de volgende Phillips schroeven van het plaatje op de batterijaansluiting:

Eén 2.2 mm lange schroef

Eén 3.2 mm lange schroef

Zorg dat je, tijdens deze reparatie, bijhoudt welke schroef waarvandaan komt, zodat je deze op de juiste plek weer terug kan schroeven. Zo voorkom je schade aan je iPhone.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.